The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core)
Example:...
Only the Schlage ND-Series can be prepped to accept non-Schlage cores.
All designs are supplied with the appropriate tailpiece
Non-Schlage cores are NOT included
Lever designs available vary d...
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed.
These are the most commonly used cylinders sometimes called key-in-lever...
A modular cylinder's length is determined by 4 basic parts; a cam screw, cam, plug extension, and a back housing. Most of these parts are used in more than one cylinder length and...
There have been a few reported cases of the torx cam screw loosening on modular designs shipped prior to April 16th 2013.
History of cam screw changes:
Standard s...
Schlage and Falcon double cylinder deadbolts have concealed screws to prevent tampering. The two methods used to conceal the thru-bolts are using screw caps or a faceplate. Use the below instructio...
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the lock and will operate t...
ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out.
ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...