cylinder cdsi option

RELATED FAQS

Question
Answer
 A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
The cylinder cam must be inverted with the SD option to work properly.
A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...
Double cylinders are only available on Von Duprin 98/99 Rim and 98/9975 Mortise devices.
The Levon lever was created to initially satisfy the ADA requirements for locks, but it is too small to fit a cylinder.  The equivalent to the Levon lever on our other products is the Rhodes and Sa...
KL
Von Duprin offers two options:   The CDSI/HDSI Dogging Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible “LOCKED” and “UNLO...
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...