Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cylindrical lock exploded view ”

RELATED FAQS

Question
Answer
Are ND locks available in 629 or 630 finishes?
The AL and ND locks are not available in any stainless steel finishes.  The only option is either the 626 satin chrome or 625 bright chrome.
Can the 5100 electric strike be used with a mortise exit device?
The 5100 electric strikes are for use with cylindrical locks only.  Instead use the following:6211 electric strike is used with mortise lock without deadbolt on a new single door, hollow ...
What does the hotel indicator look like for the A, AL, D, and ND?
Indicator not extended Indicator extended
The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed.  When this pin is pr...
What is a Grade 1 Lock?
Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 800,000 Certified Cycles ANSI/...
What is a cylindrical lock?
Cylindrical Locks: a bored lockset whose latch or bolt locking mechanism is contained in the portion installed through the cross-bore Medium, high to extra heavy duty Commercial, multi-family a...
Is there an exploded view for the B663?
A B663 exploded view can been found here.
What does the H-Series housing and linkage look like?
The housing and linkage is what sits underneath the inside escutcheon plate and can be seen in this exploded view.  The linkage is what gives the H lock simultaneous retraction.  It allows the dead...
Why can't I order The SL1/SK1 ligature resistant trim less cylinder?
The Schlage L9000-Series with anti-ligature trim cannot be ordered less cylinder (L cylinder suffix), but can be ordered less core (BD or J cylinder suffix). The cylinder rose dimensions change bas...
What is the part number for a blank outside rose for the L locks?
The blank outside rose part number is 09-508.  This part is identical to the standard rose where a plug is installed inside the rose so a small seam is visible.  Mounting posts ...
What is a Grade 2 Lock?
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI...