D lock removal tool

RELATED FAQS

Question
Answer
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
The blue lever tool remover, 24002693, is not shipped in every box. The existing wire spring lever removal tool will be included in every box.  
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
First, take wire in shape of 9 and pop off interior door knob or lever. Second, take a flat nose screwdriver and pop off the decorative trim. Lastly, you will see the screws and be able to remove l...
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...
All lock cylinders on a specific project are operable by a special "project key".  Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required...