Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ D series cylinder removal without key ”

RELATED FAQS

Question
Answer
I can not remove the key from the cylinder on my BE365 deadbolt lock.
After rotating  the key to unlock the lock, you must return the key to its normal position to remove it. 
How do you remove the cylinder from an A series knob?
To remove the knob:  Turn key 45 degrees clockwise Push in catch push pin and pull off knob  
*The older wafer style locks did not use a knob catch.  The chassis must be disassembled before the knob can be removed because it uses the wafer lock chassis spindle.
What cylinder and cam is used with the 650 series keyswitch?
1 1/8" mortise cylinders fit the 650 series keyswitch.  The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any required blocki...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.  Blocking Ring  Specify Dimension  1//8" ...
What mortise cylinder cam is needed for KR4023?
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.