Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ dead lock use medeco cylinder ”

RELATED FAQS

Question
Answer
Can the AL locks be ordered to accept Corbin Russwin core?
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Will a Medeco key-in-lever cylinder fit into an ND lock?
Medeco does offer a key-in-lever cylinder to fit the Schlage ND.You will need to contact Medeco for the cylinderSpecify a key-in-lever cylinder to fit the Schlage ND lock.They will supply a cylinde...
What mortise cylinder cam do I use on a Falcon MA lock?
The Falcon MA-Series requires a different cam for keyed functions than its predecessor the Falcon M-Series.
 
 
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Schlage now offers modular style cams to operate the Falcon MA locks.  The following part numbers are cams for all MA locks (except the MA381): L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Price Book 72A List Price $8.10
Explain the function for the L9485.
L9485:  Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn.  When deadbolt is thrown, all keys become ino...
Which conventional cylinder cam is used with an Adams Rite MS series lock?
L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders    L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders  B502-944; Sch...
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference: