Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ deadlatch vs dealock ”

RELATED FAQS

Question
Answer
How do I identify the old Falcon T lock latch from the new T lock latch?
For T locks shipping mid-June 2013, the new latch can be identified by viewing the deadlatch profile. The profile of the deadlatch has changed from a "full moon" to a "half-moon". See figure below....
What is the projection or throw of the standard latch for a Falcon T series lock?
The standard latch projection is 1/2".  Falcon also offers a 3/4" throw with a 2-3/4" backset.
What is the difference between a 33A/35A/98/9947 and a 33A/35A/98/9948 Latches?
The 33A/35A/98/9947 will work on doors with a maximum undercut of 1/4"  and the 33A/35A/98/9948 will work with a undercut over 1/4" and up to 3/4". The 47 top and bottom latches throw 5/8" and th...
What are the part numbers for the new Falcon T latches?
 Falcon T Lock Latch Conversion Table       Effective mid-June 2013  Old Part Number   New Part Number       ...
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number   &nb...
How do I identify the old Falcon T lock chassis versus the new T lock chassis?
The date of manufacture printed on the chassis cover (see below), will determine if you have a revised or old chassis. Chassis manufactured mid-June 2013 will have the new improvements. The first t...
AUXILIARY DEAD LATCH
Deadlocking Latch Bolt