dezigner installation instructions


It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documentsClick here to get the updated link to the Steelcraft Shop M...
Dezigner Trim – This unique and patented glass trim has been designed to closely simulate trims installed in wood doors and is factory: Supplied recessed into the door face, to provide a neat f...
Flush Mounted Steel Trim for Insulated glass – Designed for 1” thick insulated glass. Recessed into the surface of the door face Accommodates 1" (25 mm) thick glass. When installed, fastener...
Overlapping Steel Trim (also refer to as conventional steel trim) – This trim is the typical glass trim supplied by most hollow metal manufacturers. Surface mounted on the door face. Accommo...
Flush Mounted Steel Trim – This trim is similar to Overlapping Steel Trim but is factory supplied recessed into the door face and is available for 1/4” glass. Glazing stops are screw attached, fast...
 Basic glass trim details:
Von Duprin surface mounted 6300 electric strike paper template and installation instruction are provided with the electric strike. See attached
Click HERE for the  instruction and template for 237L device.
This information can be found at the following URL's: AD200/AD250/AD300/AD400 Cylindrical P516-092.pdf
AD200/AD250/AD300/AD400 Mortise P516-093.pdf
AD200/AD250/AD300/AD400 Cylindrical Exit P516-094.pdf
AD200/AD250/AD300/AD400 Mortise Exit P516-095.pdf
CO100/CO200/CO250 Cylindrical P516-266.pdf
CO100/CO200/CO250 Mortise P516-267.pdf
CO-Series Cylindrical Exit P516-268.pdf
CO-Series Mortise Exit P516-269.pdf
The link to the specific sheet can be found by clicking here: