Here are some of the major differences between the M and MA-Series.
Lever mounting post holes - Locations have changed on door template. (12 and 6 o'clock for M lock, MA lock is approx 1 and...
The Falcon Exit Alarm option was updated in June 2012 to include the following benefits.
Louder Alarm 95dbs vs 87dbs
Easier battery changes
24Vdc hardwire(HW) option included w...
The Falcon T lock will be featuring a new latch on June 10th, 2013. The Falcon T lock remains a certified Grade 1 lock and is compliant with ANSI / BHMA 156.2-2011. The revised loc...
Unless otherwise specified on an order, the cam supplied on Falcon mortise cylinders will be the following:
Non-IC mortise cylinder is the 5622-STD.
IC mortise cylinder is the 5622-IC.
Related...
Cams for other applications may be specified with no additional charge, see pricebook.
We used to offer a E99 rim device where there was a solenoid to lock or unlock the lever or thumbpiece trim on the back side of the center case of the 98/99 device. When we created the E996L trim ...
The old D-Series Lever used a standard lever insert similar to the pre-2002 AL-Series standard lever insert. The old D Lever insert was smaller than the AL and the two were not comp...
The 9542 is the single door operator that mounts on the "push side" of the opening with a REG arm.
The 9531 is the single door operator that mounts on the "pull side" of the opening with a STD arm...
The RX monitors the push bar while the LX monitors the latch bolt of the exit device.
A SS device has an LX and a key cylinder switch plus an emergency push bar signage.
There are two main differences:The bottom latches are differentThe Von Duprin 98/9947 concealed vertical rod device covers up to 1/4" undercutThe Von Duprin 98/9948 concealed vertical rod device co...