If arm screw is not gripping the forearm tube enough to securely hold the rod and shoe in place:
If the allen head on the arm screw (-83) is stripped out, try using a wrench to tighten it.
Try ...
The conversion kit does not contain a new mechanism case cover plate. If a cover plate is desired you would need the Fire or Less Dogging Cover Plate for EL conversion kit and panic cover plate fo...
No, the 98/99 series mortise exit device should be ordered as NL less trim. IE, 9875NL-L/TRIM. NL-OP suffix is normally used with the 98/99 series rim, surface and concealed vertical rod devices wh...
Position the 379L trim and attach with countersunk screw into the bottom stud of the trim.
Position the 55 Rim device and attach with the device mounting screw through the he...
The Ives 482 does not come with a rub plate. The brass 482 Door guard (also called 482B) comes with an edge guard or plate that is applied with adhesive to protect the edge of the door.T...
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
The 4040 Rw/PA can be mounted 3 different ways.
The 4040-18 drop plate is used for the regular pull side mount.
The 4040-18TJ drop plate is used for the top jamb push side mount.
The 4040-18P...
The 4110-18, and 4110-18 CUSH drop plates are identical. The difference between a 4110 EDA, and a 4110 CUSH is the templating on the door. That is why you order them differently, to...