Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ DO YOU HAVE DOOR FINGER GUARDS ”

RELATED FAQS

Question
Answer
What is a Finger Guard or Safety Guard?
The LCN Safety (Finger) Guard was a heavy duty vinyl product that covered the opening between the door and frame, where most hand injuries occur. The LCN 750 Safety (Finger) Guard was the pul...
What is the difference between the Ives 482B and the 482A door guards?
The difference between the Brass version 482B and the Aluminum version 482A is the size and design as well as the base material and available accessories.  The Brass version  482B comes w...
Can the 2670 be cut down to fit smaller door widths?
The 2670 Guard X device can't be cut down to fit doors less than 3 feet.  This device is designed to fit doors 36"-48" door width.
What strike is required when using the 2670 Guard-X on a pair of doors?
With a mullion: Use the standard strike 267 With no mullion and inactive leaf being held closed with flush or surface bolts: Use the 2609 double door strike
Is the Von Duprin Guard-X exit device fire rated?
The Von Duprin Guard-X exit device is not fire rated because the deadbolt is not spring loaded. Therefore, there would be no positive latching as required on a fire rated opening. 
Does the Ives 482 Door Guard come with a rub plate?
The Ives 482 does not come with a rub plate.  The brass 482 Door guard (also called 482B) comes with an edge guard or plate that is applied with adhesive to protect the edge of the door.T...
Is the 2670 Guard X fire rated?
The Von Duprin 2670 Guard X is used only on non fire rated doors thus is not fire rated.
Does Von Duprin offer any pulls that through bolt to the Guard-X device?
Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device.  Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...