Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...
Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...
CAUTION must be used in investigating this problem - In most cases, excessive field rusting of products is caused by improper storage at the jobsite. That situation must be validated prior to refus...
The only routine maintenance required on a biometric hand reader is cleaning. The platen surface upon which the hand is placed, the side mirrors, and the overhead window should be cleaned with rea...
It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documentsClick here to get the updated link to the Steelcraft Shop M...
Steelcraft
frames and doors are furnished with a high grade, low gloss, baked-on prime
paint that provides the best possible protection against corrosion, abrasion
and weather, and is an excellent ...
Steelcraft does not offer factory powder coated doors and/or frames.
Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat.
The higher heat can ca...
A current PDF copy of the Steelcraft Tech Data Manual is available on the Steelcraft website and can be downloaded here.
To order a printed copy of the Steelcraft Tech Data Manual contact the Cust...
Closers mounted according to LCN installation instructions require no periodic maintenance or seasonal adjustments. Monthly, quarterly, and annual visual inspections are recommended for Fire/...