Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ door height with closer ”

RELATED FAQS

Question
Answer
Which closer should I use for a "High Wind" condition?
A 4110 with AVB (advance variable back check) would be recommended. Using a SCUSH (Spring Cush) arm will also help minimize shock to all door hardware.
What are the dimensions of the SC70 footprint
The measurements from center line to centerline of the mounting holes are 2-3/8"  x  6-3/4".
Can a 4110 closer be mounted on a 24 inch door?
Standard templating will allow a 4110 closer to be mounted on 24" wide door.
Does LCN sell a coupler to stack two 4040XP closers together?
LCN does not recommend this type of installation, and has never sold a coupler to do this.
What is clear opening width?
Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb.          &nbs...
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
Does LCN still make a closer that has the built in smoke detector?
The SED/MED series closers where discontinued in 2000. The SE or ME series from LCN can be used as replacements to provide a hold open feature, but will not have the smoke detector...
Does the old style 4030 have the same templating as the new style 4031?
The old 4030 series was: Handed Mounted regular arm hinge side. Had sized springs, were not adjustable. The 4033 is an obsolete closer.  If required, handing can be verified by looking at ...
How do you order a Senior Swing header for a 2810 on one leaf and a 2010 on the other?
LCN does offer a 2810 Senior Swing / 2010 manual closer combo for a pair of doors.  Both units contained within the same Senior Swing header. To order a paired operator with a 2810 on&nb...