Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ door jamb width ”

RELATED FAQS

Question
Answer
What is clear opening width?
Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb.          &nbs...
What is the minimum clear opening width required by ADA on a single door?
The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...
JAMB WIDTH
Jamb Depth
What anchors are used in FEMA Tornado Resistant openings?
The following anchors are approve for use in FEMA Tornado Resistant openingsMasonry walls:Jamb anchors - Wire masonry anchorsSill (base) anchors - Adjustable base anchorsExisting walls:Jamb an...
What are Pneumatic Automatic Operators?
 Pneumatic Automatic Operators are used in areas where electrically operated devices are not convenient or permitted.  Consists of a modified, heavy-duty door closer for manual oper...
How many compression anchors are provide per jamb on DW-Series frames?
For compression anchor details refer to the “ANCHORING SYSTEMS”  section in the Steelcraft Tech Data Manual.
Door hitting the strike jamb?
If the door hits the frame (or rubs on the rabbet of the head or jamb) the frame is out of square and improperly installed. Door edge rubbing on the rabbet - shimming the hinges may resolve the...
Can a 4041 EDA be mounted top jamb?
The 40401/4040XP closer with optional EDA arm has to be mounted parallel arm on the push side of the door.