Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ doromatic parts manual? ”

RELATED FAQS

Question
Answer
How do you identify the model of a Falcon closer?
To determine the SC series, measure center to center on the closer body bolt hole mounting pattern and an overall description of the closer and arm. SC91 -- 6-3/8" x 3/4" -- unique arm SC93 -- 9-1...
How is HB achieved on the 1690 device?
Install the pinion cam at the top of the retractor per Figure 7-3 in Step 7 of 1690 Instructions.
How do you adjust a door closer?
  How to:  What are the steps to adjust a door closer?   Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment.  All cl...
Where are hardware templates?
All the templates can be found at us.allegion.com   Please click here
How do I get service on my Astro Swing operator that isn't working properly?
LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...
Are there any parts available for the old Dor-O-Matic 1200 overhead concealed series closers?
The Dor-O-Matic overhead concealed manual door closers have been obsolete since 1999, and there are no parts available for them.
Are there any instructions for Von Duprin device maintenance?
Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...
Where are the part manuals for Falcon exits?
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the 
What power supply is need for Falcon EL devices?
The Von Duprin PS914 power supply with either the 900-2RS  or the 900-4RL option board is required.
How far can the 1690 series Doromatic be cut down?
A standard 1690 device can be shortened by 6" per page 12 of the 1690 instructions
What strike is used for a pair of doors with a Dor O Matic Rim device x Flushbolts on inactive door?
The STK45 strike is used on the inactive door leaf.
What is the part number for Doromatic EL solenoid?
The part number for the solenoid for the 1690/1790/2390 is 971687-00 and for the 1490/1590 is SOLENOID.142 (which is 971687-00 with a machined bracket).  The solenoid characteristics are the s...
What is the part # for Doromatic pinion cam?
Part numbers are: 4270903177 for 1 each CAM.102 for a package of 10
Is the old Doromatic 1090 the same as a 2090?
Yes, with the exceptions that the 2090 base material is aluminum whereas the 1090 was either brass or bronze base material depending on the finish.
When did Doromatic change the 1690 dogging assembly?
The old style dogging design was only supplied for the first year and only through Kawneer.  This change occurred in 1991.
Can you operate a Doromatic EL 1490 with an LCN power supply?
This is not possible.  Due to the device's 16 Amp in-rush it would require it's own PS914-2RS which will power 1 or 2 devices.
What is the difference between ED and EL for Doromatic devices?
EL only retracts the latchbolt or vertical rods/latches. ED retracts the latchbolt or vertical rods/ latches and the push pad of the device at the same time.
Are any of the DOM exit devices rated?
Fire rated devices are not an option.
Can the Von Duprin RX Switch be installed on an existing Falcon Monarch 19?
The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.
Is the 1990 a direct replacement for the 990 Exit device?
Yes, the 990 is the direct replacement for the 1990 devices.