Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ double door strike for guard x ”

RELATED FAQS

Question
Answer
Does Von Duprin offer any pulls that through bolt to the Guard-X device?
Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device.  Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...
Is the 2670 Guard X fire rated?
The Von Duprin 2670 Guard X is used only on non fire rated doors thus is not fire rated.
What electric strike can be used on a pair of doors with an L9000 lock?
Von Duprin 6223 electric strike is the most common closed back strike or the 6221 for open back strike on inactive leaf that can be used with Schlage L9000 or Von Duprin 7500 mortise lock.
What is the backset for a 98/99 rim device with a 1609 strike?
The backset for a 98/99 rim PANIC device with 1609 strike is 2 3/8" from center of the opening to center line of the device. See template
What strike is required when using the 2670 Guard-X on a pair of doors?
With a mullion: Use the standard strike 267 With no mullion and inactive leaf being held closed with flush or surface bolts: Use the 2609 double door strike
Is there an electric strike that will work with the 2670 Guard X?
The Von Duprin 2670 Guard X does not have a spring loaded latch bolt, it is a dead bolt and will not operate with any electric strikes.
Can the 2670 be cut down to fit smaller door widths?
The 2670 Guard X device can't be cut down to fit doors less than 3 feet.  This device is designed to fit doors 36"-48" door width.
Is the Von Duprin Guard-X exit device fire rated?
The Von Duprin Guard-X exit device is not fire rated because the deadbolt is not spring loaded. Therefore, there would be no positive latching as required on a fire rated opening.