Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ eda stop arm ”

RELATED FAQS

Question
Answer
Can a 4041 EDA be mounted top jamb?
The 40401/4040XP closer with optional EDA arm has to be mounted parallel arm on the push side of the door.
Can you mount a 4011 as a parallel arm like the 4111?
The 4011 can only mount on the Pull Side of the door and the 4111 can only mount on the Push Side of the door. Differences - The 4011 and the 4111 cylinders are different and the pinion shafts are...
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
EDA ARM - The EDA arm is a heavy duty parallel arm mount.  The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
Can you mount a 4041 Cush arm with a EDA arm template and get 180 degrees opening?
The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.
Can a Cam Lift hinge be used with LCN closers?
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.             Manual Closers: Maximum li...
Is the EDA or Cush arm with threaded studs still available?
ST-3195 is used to obtain the old style EDA or Cush arms which were assembled with threaded studs so that you could take apart the arm assemblies. Our current standard EDA and Cush arms are rivet...
Why does the arm of my 4110 EDA touch the door when it is closed?
If the closer arm is touching the door, it is because the arm or the closer body is not templated correctly. Confirm dimensions are taken from the proper location and make corrections if needed. 
What are the 1460 closer arm options?
The 1460 Regular Arm part numbers are: Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish). Regular Arm with PA -- 1460-3077PA (must specify finish). Regular Hold Open Ar...
Can a 4110 EDA and a Glynn Johnson 100 be used together?
A special template is not needed, the closer drops down far enough on the door where it does not conflict with the GJ100 series concealed overhead stop. 
What special template (ST) is used with a 4110 closer and GJ90 series?
ST-2730 is used with a 4110 closer and GJ90 series (up to size 4).  ST-2730 includes a special template and special arm with a -62G shoe and bent forearm. If a drop plate is required, a 4010-18 d...