Security anchors are used in DW/K frames located directly above or below strike preparation on door side of frame. Because there are only two points of anchoring, the compression anchor near the he...
Yes, stainless steel doors and frames are available.
Door Construction:
LS-Series:
Visible edge seams
Door construction similar to the L-Series
LSW-Series:
Seamless with we...
Both the DW and K-Series frames are identical with the exception of the base anchoring. Both the DW and K-series frames are supplied with a field adjustable compression anchor in each jamb located ...
CAD drawings are available for doors and frames in 3 drawing formats:
Autocad (.dwg) - Release 12
Encapsulated PostScript (.eps)
Data Exchange (.dxf)
Drawings are available on the...
Drywall Slip-on frames are recommended and designed to be installed as KD (Knock Down) assemblies and not recommended to be welded (SUA). If a DW-Series or K-Series is welded prior to installa...
Yes, an additional jamb anchor can be used at the bottom of the frame in lieu of the typical (adjustable or weld-in) base anchor in fire rated frames.
This is limited to the anchor designed for...
No, an adjustable base anchor is not supplied on frames with existing opening anchors.
The anchor design for use in existing masonry walls, is a pierce and dimple in the frame soffit for 3/8"...
Pocket pivot hinges are mainly used in cross corridor applications where clear opening width is a factor.
For frames, pocket pivot hinges are a special hinge options which must be spe...
For W lock levers, you can choose whether or not to install the mounting posts. This will also affect how the door is prepped so be sure to determine how you will install the locks befor...