Engage NDE add credential error

RELATED FAQS

Question
Answer
The 1 1/8" - Square corner, T-strike, box,  1 1/8" x 2 3/4" (1) T-strike (1) Standard box (1) Door position magnet
All Keypad ONLY credentials with firmware versions between 2.9.2 and 2.11.0 should be updated to the latest firmware available at www.schlage,com/support.
A firmware issue with Keypad ONLY credential firmware, versions 2.9.2 through 2.11.0 and manufactured between 9-9-2010 and 1-5-2011 will exhibit poor battery life.
The Keypad ONLY credential Reader (KP) can prevent the reader from entering its low power sleep mode - with firmware versions 2.9.2 through 2.11.0
A Technical Note has been generated to document one method of measuring battery current. See the attachment HERE.
The NoTour function only allows writing to 11 sectors on the fob.  Each lock added to a user uses 1 sector.  Once those 11 sectors are full, No Tour is not available.  You can ...
Issue: “Credential Error” when trying to use Schlage Mobile Credential on iOS or Android. Resolution: Follow this guide to resolve issues with Schlage Mobile Credential errors: ...
Make sure the user does NOT have the mobile credential installed first. If they do, delete the app first.  Click on the link you will get once the phone number has been added to Engage.&...
Out of the Box, or after a Factory Default Reset, all AD locks can be used in a "Construction Mode".    At launch ...   The AD-Series locks would accept the first card credentia...
Update your device firmware to the latest version to fix this early design / feature update
The sample credentials are: Bit format: 26A, 26-bit format Facility code: 55  The Badge ID is printed directly on the card.
First, perform a Factory Default Reset  Next, close the app, turn off Bluetooth (swipe up from the bottom of the screen, tap the Bluetooth icon). Turn Bluetooth back on.  Reop...
You must have at least one 2.0 (B version) Engage device commissioned to that Engage site to have access to the Mobile Credential field. NDEB or LEB or CTEB.
No, SEOS CSN is different every read, we can't read them even if iClass CSN is enabled.