Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ exit device electrification kit ”

RELATED FAQS

Question
Answer
Does EL conversion kit for Von Duprin exit devices contain mechanism cover plate?
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired you would need the Fire or Less Dogging Cover Plate for EL conversion kit and panic cover plate fo...
Can the EL or QEL conversion kit be used on the old Von Duprin 33/35 exit device?
Current EL and QEL baseplate conversion kits can be used on all latching types of the 33/35 series (non "A" version which were manufactured prior to 2003).  At one time, the obsolete black EL ...
Is there an EL conversion kit for the Falcon 2390 exit device?
There is no EL conversion kit for a 2390, the device will need to be replaced.
What is the part number for the dogging assembly for a 1690/1790/2390?
For any device made after 2001, the part number for the Falcon 1690 dogging kit would be KIT.1197 For devices made prior 2001, the dogging kit is no longer available and a new device must be ...
What is the part number for the EAK PCB only for Monarch Falcon devices?
PCB only for the Alarm Kits prior to June 11th, 2012 is part #650335 and was used in the older 17 & 18 devices, 19, & pre June 2012 24/25's.
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.
Is there a conversion kit to add Electronic Dogging (ED) or Electric Latch Retraction (EL) to a 1690 or 1790 in the field?
There is no conversion kit to add EL or ED to an existing 1690 or 1790 series device. All of the components are built into the device, since the device does not have a separate baseplate.&n...
Is the Falcon 1390 exit device dogging kit (4270106669) still available?
The Falcon 1390 exit device is discontinued and parts are no longer available from the factory. New England Door Closer may still have some older kits and can be contact...
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
Is there an Exit Alarm Retrofit Kit (EAK) for the 19 series?
These kits for the 19 Series were discontinued June 11th, 2012 when the updated alarm kit for the 24/25 series was released.   Prior to discontinuation, it was  o...
Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?
You need to order the EL98/9947 or 3'  EL conversion kit.  This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.