extended length tailpiece

RELATED FAQS

Question
Answer
Key-in-lever tailpieces differ in length depending on the lock series, function, and design.  Click here to identify the tailpiece and length.    NOTE: Modular ...
Standard Schlage rim cylinders will fit a total thickness of door and projecting trim of 3 inches, this includes a minimum of 3/8" of engagement of the tailpiece into the exit device.  See ima...
For total thickness measurements larger than 3 inches see the special cylinder offerings in Pricebook.  Specify the part number and include the total thickness.  We do not offer the ...
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately.   If an extended tailpiece is needed, then a complete lock ...
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...
There are a few things to check in the 912L trim is not retracting the latch  as expected.  If the 912L was shipped after February 28,  2011, Check the installation ins...