MA531 (ANSI F20) Apartment Corridor Door Lock
Latch bolt operated by knob/lever from either side, except when outside knob/lever is made inoperative by buttons in face. Dead bolt operated b...
There are several Schlage and/or Falcon locks that have been tested and approved for this application.
For Commercial use the locks have been tested and approved as ...
Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards:
Cylindrical, Bored and Preassembled Locks & Latches
8...
The ANSI 156.19 standard states (in appendix A-5 Knowing Act Switches) that wall actuators are to have an installation height of a minimum of 34" and a maximum of 48" (center of the switch) of...
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards:
Cylindrical, Bored and Preassembled Locks & Latches
400,000 Certified Cycles
ANSI...
The American National Standards Institute (ANSI) and
Builders Hardware Manufacturers Association (BHMA) have developed durability,
strength and performance standards for every type of door hardware...
The Falcon T lock will be featuring a new latch on June 10th, 2013. The Falcon T lock remains a certified Grade 1 lock and is compliant with ANSI / BHMA 156.2-2011. The revised loc...
The 3130 Series closer is UL listed- Fire Rated (UL-10C) for up to 3 Hr.
The Door and Frame Manufacturer needs to be contacted to verify their Door/Frame rating would not be ...