Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon el duty cycles ”

RELATED FAQS

Question
Answer
Are the Falcon EL solenoids rated for continuous duty?
The Falcon EL devices can be operated in a continuous duty cycle.
Is Von Duprin's EL device rated for continuous duty?
The Von Duprin EL devices are rated for continuous duty.
How many times can an EL device be operated when using a PS914-2RS with battery backup?
The Von Duprin PS914-2RS retracts the EL or QEL device approximately 200 times with five second hold time after each pull.
What would cause an EL device to pull and release?
If your Von Duprin EL (solenoid) device pulls and releases quickly instead of holding the latch retracted, please check all of the items below.In most cases, one or more of these solutions will r...
Is dogging available w/ EL option on 24 or 25 series devices?
This option is not available as the solenoid is in the mechanism case where the dogging components would go.  An HD-EL solenoid is not available, and Special Dogging(SD) is not an option ...
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
Is a Von Duprin or Falcon EL device available in 12V?
 Electric latch retraction, EL, devices are only available in 24VDC.
Is there an EL conversion kit for the Falcon 2390 exit device?
There is no EL conversion kit for a 2390, the device will need to be replaced.
How do you test a Falcon 24 or 25 Series EL solenoid?
The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, s...