Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon floor closer arm template ”

RELATED FAQS

Question
Answer
Does LCN or Dor-O-Matic still make a floor closer?
Neither Dor-O-Matic or LCN manufacturers a floor closer. 
Are the arms for the Falcon SC60, SC70, SC80 and SC90 all the same?
The Falcon SC60, SC70, and SC80 series closers all use the same arm options. The SC91 series uses a different arm from the rest.
On which closer is the fusible link arm available?
The Fusible Link arm is available with the 4010, 4020 and 4110 series closers. They all use the same Fusible Link arm. The UL Listing number is for the Fusible Link arms is R1943. The 4010 Serie...
Does LCN still make a 4010SE / 4110 SE?
The LCN 4010SE / 4110 SE series are obsolete, and on longer available. They were replaced by the 4040SE series. The 4010SE / 4110 SE track is replaced with the current 4040SE trac...
Can you convert a 4041 Cush arm to a 4041 HCush arm and use the same templating?
The 4040XP/4041 Cush and HCush (Hold Open Cush) use the same instructions / template.
What is the maximum reveal for a regular arm 4642 operator?
Max. reveal for a 4642: 4640 Regular arm -- 4.5" 4640 Long arm -- 8" 4640 x ST-3088 ( custom made - extra long rod) -- 8" to 11" No special mounting instructions required, just standard templ...
Can you mount a 4041 Cush arm with a EDA arm template and get 180 degrees opening?
The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.
Can I mount an LCN Cush closer with an GJ overhead stop?
It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.
Where are hardware templates?
All the templates can be found at us.allegion.com   Please click here