Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon m series parts ”

RELATED FAQS

Question
Answer
What is the part number for T lock tailpiece used with a conventional cylinder?
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
Will Falcon B locks prepped for BD accept a 6 or 7 pin core?
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...
What is the part number for the former F588 from Monarch?
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
What is the part number for the Falcon 8200 (8230/8240) series operator control box?
The Falcon 8200 Series control box can be ordered as either an 8230-3462 or an 8240-3462. They are the same part.
Are parts still available for the old Falcon M locks?
Only the lever return spring is available.
Related solution: What is the part number for the lever return spring for the old M series mortise lock?
What is the part number for the EAK PCB only for Monarch Falcon devices?
PCB only for the Alarm Kits prior to June 11th, 2012 is part #650335 and was used in the older 17 & 18 devices, 19, & pre June 2012 24/25's.
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.
What are the part numbers for the new Falcon T latches?
 Falcon T Lock Latch Conversion Table       Effective mid-June 2013  Old Part Number   New Part Number       ...
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number   &nb...