Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FALCON M SERIES REINTRODUCTION ”

RELATED FAQS

Question
Answer
How do I cut a door to accept a Falcon W series lock?
For W lock levers, you can choose whether or not to install the mounting posts.  This will also affect how the door is prepped so be sure to determine how you will install the locks befor...
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
Is the new Falcon T Series latch compatible with all available T lock strikes?
The new Falcon T-Series latch, introduced mid-June 2013, will work with all available T lock strike options.  No changes have been made to the strikes.
Are parts still available for the old Falcon M locks?
Only the lever return spring is available.
Related solution: What is the part number for the lever return spring for the old M series mortise lock?
What is the part number for T lock tailpiece used with a conventional cylinder?
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
Will Falcon B locks prepped for BD accept a 6 or 7 pin core?
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...