falcon ma series parts

RELATED FAQS

Question
Answer
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from&n...
Only the lever return spring is available.
Related solution: What is the part number for the lever return spring for the old M series mortise lock?
Here are some of the major differences between the M and MA-Series.  Lever mounting post holes -  Locations have changed on door template.  (12 and 6 o'clock for M lock, MA lock is approx 1 and...
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
The Falcon MA will not fit a 1-3/8" thick door. 
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the 
Regular Core (suffix keyway to number) Description Uncombinated Combinated 6-Pin 7-Pin 6-Pin 7-Pin Standard C646 C647 C606 C607 Best style capping CB846 CB847 CB...
The MA was launched 4/1/10 and replaced the Falcon M lock.
The Falcon M series was discontinued 3/31/10 and was replaced by the Falcon MA series.
See Step 3 of the mortise lock reversing instructions(D-4010) which shows function conversions and what part(s) are needed if any are needed.
These parts are no longer available.  For reference the spring part number is 4841 and the clip part number is 4326.