Falcon Monarch XX series trims

RELATED FAQS

Question
Answer
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
 The Falcon Monarch 718C and the 718NL trims can be used on the 25-C exit device.  The 718C trim is listed in the Price Book for the 25 series  The instructions attache...
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Pr...
Use Schlage B520-295 cam with the Falcon 986 conventional cylinder. Use Falcon A12667-013-00 with the Falcon C987 SFIC housing.
Yes, "Standard" was the old name for the sectional pull trim for the 18/XX devices and is now called Athena.  The trim is the same, only a name change.
The current 712L/912L (after 2/28/2011) can be field converted by purchasing the NL Spring part #600339 and following the L to NL function change instructions.
Falcon Monarch XX series trims will work with Monarch 18 series exit devices.
The 812L trim is available for the 18 series as it is still used on the XX series.  When ordering, state the type of device trim is being used on: rim, mortise, or surface vertical rod.