Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FALCON SFIC RIM CYLINDER ”

RELATED FAQS

Question
Answer
What is the part number for the SFIC rim cylinder driver?
The Schlage SFIC rim cylinder driver is part number B520-365, shown below.     Figure 1: SFIC Rim Cylinder Housing
Will a Falcon cylinder work in a Schlage lock?
Key in lever Falcon cylinders do not work in Schlage locks.  The cylinders may fit, but there are no specific tailpieces created to operate any Schlage lock. SFIC SFIC is universal so Falcon and...
   Hotel cylinder in L9000 As long as the correct cam is used (Schlage clover), a Falcon Hotel cylinder will properly function in an L9486 hotel lock.
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
Which cylinders were not affected by the modular design change?
The following list of cylinders were not affected by the change to modular cylinder:    09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...
Does Schlage offer a Rim cylinder FSIC housing less core?
Rim cylinder housing only for FSIC is part number 20-079.
Rim cylinder housing only for SFIC is part number 80-129.
What is the part number for the Schlage small format rim cylinder tailpiece?
B502-899 is the tailpiece for both the SFIC and standard rim cylinders.
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
Will Schlage locks with a BD suffix accept a best SFIC core?
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the lock and will operate t...