Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ flush panel adoptor ”

RELATED FAQS

Question
Answer
What is the standard undersize for Steelcraft transom panels?
Steel transom panels are available: 1 3/4" thick panels - supplied in L-Series (L20, L18 or L16-Series) laminated construction. Recommended down sizing is as follows: Without Transom Bar 3...
FLUSH PANEL ADAPTER
Narrow Frame, PA Mount, Parallel Arm Mount, Parallel Arm Installation, PA Installation
Are astragals required on fire doors?
Astragals are required on: 3 hour fire rated pairs: Double doors - swinging in the same direction Double Egress - swinging in opposite directions Fire rated Dutch Doors Fire rated 1 3/4" t...
Can you mount a 4040XP CUSH with a Flush Transom frame?
The 4040 XP CUSH/EDA can be mounted on a Flush Transom frame by using a -419 Flush Panel adapter.
What astragals are available?
Types of astragal offered from Steelcraft are as follows: "Z" Astragal - For information on "Z" astragal types and attachment refer to the TD Manual page 3.3.17. Most commonly used on double ...
How do you install a 4110 with flush transom frame?
The 4110 series closer is installed on a flush transom frame using the -419 flush panel adapter.
What is an astragal?
An Astragal is an applied molding attached most commonly to the meeting edge of doors to: Protection against weather conditions Minimize the passage of light between the doors Retard the passa...
Does Steelcraft offer a KD (knocked down) assembly for sidelight frames?
Side Light and Side Panel frames - Side Light and Side Panel frames are not KD (Knock Down), they must be assembled and welded. All side lite and side panel frames must be assembled and welde...
What options are available on the CE-Series doors?
CE Series door in a variety of embossed panel designs and gages. The CE series embossed panel doors also offer a wide range of specifiable options including sizes, glass light designs and hardw...