Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FOR FIRE RATED DOOR ”

RELATED FAQS

Question
Answer
Can doors be prepared for raceways in the factory?
Raceway availability: Optional factory installed raceways are available in doors but are not available in frames. Preparation Info: Steelcraft installs a flexible 3/4" ID steel...
Can 5100 electric strikebe used on fire rated door?
The Von Duprin 5100 electric strike is not for fire rated applications.
Can the 9949 CVC be used on fire rated wood doors?
There are several door manufacturers that have achieved a 90 minute UL Fire listing as shown. Von Duprin CVC with Marshfield Wood Door: Von Duprin is pleased to announce that Marshfield ...
What strike do I use with a Von Duprin rim device on a pair of doors with flush bolts?
NON Fire Rated doors would use the 1609 strike applied to the inactive leaf with flushbolts.  This may NOT be used on Fire Rated openings.
Does LCN still make a closer that has the built in smoke detector?
The SED/MED series closers where discontinued in 2000. The SE or ME series from LCN can be used as replacements to provide a hold open feature, but will not have the smoke detector...
Do any products offered by Steelcraft contain asbestos?
Steelcraft doors and/or frames do not contain any asbestos. Steelcraft did use asbestos in the following products: Steelcraft S16-Series stile and rail door with flush panel and UL fire door l...
What is the largest diameter hole that Steelcraft can provide for viewer preps?
Non fire rated doors can be furnished with a maximum 3" diameter hole for viewer preparations. Fire rated doors have a 3/4" maximum holes size unless otherwise listed by UL or ITS/WHI. Viewers mus...
What Steelcraft doors can be prepped for a Von Duprin InPact device?
Steelcraft L-Series and T-Series doors are available (as an option) factory prepared for the Von Duprin InPact exit device.