Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Full size core contruction bittings ”

RELATED FAQS

Question
Answer
What is the control key bitting for 0 bitted small format interchangeable cores?
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
Can the AL locks be ordered to accept Corbin Russwin core?
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
How to order the mortise full size interchangeable core with a construction core.
This only applies to the full size interchangeable cores.  The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed).  Simply add (-ICX) to the end o...
Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Why can't I order The SL1/SK1 ligature resistant trim less cylinder?
The Schlage L9000-Series with anti-ligature trim cannot be ordered less cylinder (L cylinder suffix), but can be ordered less core (BD or J cylinder suffix). The cylinder rose dimensions change bas...