Steelcraft uses a 7 gage hinge reinforcement for 4 1/2" and 5" butt hinges as standard on all frame series.
The hinge reinforcement size for either 4 1/2" or 5" hinges (standard or heavy duty hing...
Hinge manufacturers do not require or recommend that doors should be reinforced for continuous hinges. Steelcraft does not reinforce for continuous hinges unless it is specified on the customers' P...
Butt hinges can be used on doors up to 4' wide and 200 pounds. There is no maximum door height, just need to add a hinge for every 30" or part there of over 7'.
Steelcraft offers two optional types of reinforcements for open section header to be installed in distributor shop or in the field:
Full profile sleeve; is a 14 gauge, 16" long part to fit the p...
An EPT can be used with a Cam Lift Hinge:
Maximum hinge lift dimension = 1/2".
The EPT must be installed correctly with the tube at the top on the door side and the tube at bottom on...
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2"...
See related solution: Can an EPT be used with Cam Lift Hinges?