When installing the arm; the gearbox shaft and door must be at the (+90°) full open position. The following step are used to install the Senior Swing (STD) pull arm.
Install the header using app...
Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device.
Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...
EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
Chexit devices shipped prior to 8-24-2015 with solenoid - the solenoid pulls and drops, the alarm sounds, there is a solid LED or no LED light after the rearm t...
The following could cause the Von Duprin CX solenoid ( devices shipped prior to 8-24-2015) to pull and drop and sound the alarm with solid LED light.
Wrong power supply, requires Von Duprin ...
The following could cause the Chexit solenoid ( devices shipped prior to 8-24-2015) pulls in then drop out with no alarm.
Mechanical adjustment such as vertical rods. Disconnect t...
Most Panic devices are not designed for exterior applications.
As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish an...
Deadbolt Locks (Deadlocks): a lock with a bolt which requires a deliberate action to extend and which resists end pressure in the unlocking direction when fully extended
Medium, high to extra he...
The 6000 series electric strikes are commonly used on exterior doors but they are not waterproof and are NOT recommended for outside such as on a gate with no protection from the elements.