Minimum dimensions to cutouts for glass lights:
Vertical edge of door to edge of cutout = 5 29/32"
Top of door to top of cutout = 6"
Bottom of door to bottom of cutout = 10"
Reinforcing chann...
Yes, glass light can be used or prepped in conjunction with the Von Duprin 94/95 Series INPACT device however there are dimensional limitations between the glass light and the InPact door preparati...
Glass lights available:
Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification.
Glass Light Options - Other glass lights are available but ...
The minimum stile and rail dimensions are to exposed glass are:
Stiles = 6 13/16"
Top Rails = 6 3/4"
Center Rails = 7 1/2"
Bottom Rail = 10 3/4"
For high traffic and high abuse locations th...
Glass Light is a preparation in a door for view window, vision and/or glazing including glass stop and glazing bead and may also be refereed to as a lite.
Doors are available with a wide variety o...
The minimum stile and rail dimensions with glass trim are as follow:
Top Rail:
6 1/4" top of door to exposed glass or
5 1/2" top of door to cutout
Center Rail:
6 1/2" exposed gla...
When dealing with glass lights in doors, there are three (3) critical dimensions which must be coordinated:
Exposed Glass Size (EGS) - the horizontal and/or vertical dimensional size of the vision...
Maximum glass light size for a 90 minute (1 1/2 hour) door depends on the type of glass being installed.
Wire glass = 100 square inches is max exposed glass when wire glass is used.
Note - ma...
Maximum glass light sizes for 3 hour fire doors is as follows:
Wire glass - not approved for use in 3 hour fire doors.
Ceramic glass:
UL & ITS/WH allow one (1) light with 100 square inc...
Steelcraft offers all the standard lights as well as special size glass lights in the H-series door. Effective April 1, 2012, (Bulletin # B-100.12) the default for Dezigner Trim in H-S...
The GCS (Glass Cutting Size) is determined by adding 1 1/4" to EGS (Exposed Glass Size) to both the height and width dimensions.
Ex: EGS = 20" w. x 30" h. GCS = 21 1/4" wide x 31 1/4" high
St...