Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Guard X double door strike part number ”

RELATED FAQS

Question
Answer
What strike is required when using the 2670 Guard-X on a pair of doors?
With a mullion: Use the standard strike 267 With no mullion and inactive leaf being held closed with flush or surface bolts: Use the 2609 double door strike
What is the part number for the pcb board on the 2670 Guard X exit device?
The following are part numbers for 2670 Guard X exit device PCB: pcb.10018 for English pcb.10019 for Spanish pcb.10020 for French
What are the part numbers for the mounting posts and screws for an L9000 lock?
 Mounting Posts   Part Number  Door Thickness  L583-211  1 3/8"  L583-212  1 3/4" - See note section on SL1 trim  L583-213  2...
How do I remove an X lock from the door?
To disassemble an X lock, remove the inside knob and unscrew the inside collar and rose.  The X lock spanner wrench (012172-000-30) can be used to depress the knob catch as well as tighten/loo...
How to replace the circuit board or horn on a Guard-X device?
See PCB replacement instructions below. The horn is part of the board and can only be replaced by replacing the entire board.
Is there an electric strike that will work with the 2670 Guard X?
The Von Duprin 2670 Guard X does not have a spring loaded latch bolt, it is a dead bolt and will not operate with any electric strikes.