For hurricane applications, seamless edges are available as an option:
H-Series doors are available with optional seamed filled (HF) seam welded (HW) door edges.
HE-Series doors are a...
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications?
The only approved latching hardware for inactive leaf of pairs w...
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage.
If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...
To remove the knob:
Turn key 45 degrees clockwise
Push in catch push pin and pull off knob
*The older wafer style locks did not use a knob catch. The chassis must be disassembled before the knob can be removed because it uses the wafer lock chassis spindle.
Warranty Statement
3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below
The provisions of these limited warr...
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently
Medium duty
Commercial, government or multi-...
The L-Series doors are designed for virtually all construction requirements in commercial building applications. They have also been tested and approved for uniform wind load per ASTM E330. ...