Handing change schlage sense

RELATED FAQS

Question
Answer
The Windstorm device is handed.  It is reversible by ordering and installing the appropriate handing of center case.  The center case is handed because both vertical rod linkages must m...
Standard and Full Size I/C mortise cylinders on the L9485 and L9486, Hotel or Restroom Locks, use the concept of a ward ring to lock out all change keys once the deadbolt is thrown. Instead of a fu...
HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation.  Right hand shown below.
The 912L trims produced after 2/28/2011can be re-handed in the field. See appropriate 912L instructions at 912L instructions for trims after 2/28/2011For 912L instructions on trims prior ...
The RU lock is factory handed for a Left hand or Right hand door.   For reverse handing ( Left hand reverse and Right hand reverse doors) see step 9 of the installatio...
Handing can be field changed, see step 3 of the 510L installation instructions.
Changing the handing on a Von Duprin 373L trim requires following parts: LHR to RHR requires 090092 ( Package of 4 springs ) and 050597 ( back plate assembly ). RHR to LHR requires  090091 ( Pa...
You can reference the 7500 mortise lock rehanding instructions. Remove the two screws from mortise lock faceplate. Remove the face plate and the collar from the mortise lock then rotate the la...
Handing can be changed, see step 3 of the 1490 installation instructions.
The MA lock is field reversible.  The process involves three potential steps depending on what hand is needed. Rotating latchbolt - Changes swing of lock.  ex (RH to RHR) or insw...
Changing the hands is not an option.  Recommendation is to replace the E376L trim with the correct handing.