installation instructions for rehanding

RELATED FAQS

Question
Answer
The E6 version of the E-Series biometric Hand Reader holds 256 user hand templates.  To accommodate a larger user base, the hand reader can be configured to hold up to 27,904 user hand ...
You can reference the 7500 mortise lock rehanding instructions. Remove the two screws from mortise lock faceplate. Remove the face plate and the collar from the mortise lock then rotate the la...
The RS232 pin out on a F3-style main board for a F-Series HandKey or a F-Series HandPunch to the J4 connector is Pin 1 (Pin 1 is the farthest pin from the edge of the board) is Groun...
If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu.  In order to ...
The RU lock is factory handed for a Left hand or Right hand door.   For reverse handing ( Left hand reverse and Right hand reverse doors) see step 9 of the installatio...
Latch retraction issues at time of installation could be caused by incorrect handing of the lock chassis.  Move the driver to one of the following positions as indicated below: