Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ive ept location ”

RELATED FAQS

Question
Answer
Where is factory recommendation for location of an EPT?
EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...
How many P & D (Pierce and Dimple) holes are in a frame?
The following are quantities of EMA anchors (pierce and dimples) based on range of frame height:  Quantity  Nominal Frame Height     2     1'...
How many anchors are in a frame?
For Steelcraft frame anchor locations refer to the frame "Anchoring Systems" section of Steelcraft's Tech Data Manual.   Basic guidelines are as follows:   Anchor ...
Where is the EPT location of a Pin-and-Barrel Continuous HInge?
The 600/700 Series EPT Template shows recommended locations based on the standard sizes, The customer can provide a different dimension measured from the top of the hinge to the Cen...