IVES EDGE DUARD

RELATED FAQS

Question
Answer
Catalog information for Ives Edge Guards is currently being developed.  The order form with part numbers is available. Ives Edge Guard Order FormIves Edge Guard BrochureIves Edge Gua...
The sliding door edge pull is part number 230.
The 5654 and 5754 mullions have mullion edging that accepts weatherstripping. The weatherstripping is included with both mullions and is already attached to the mullion edging on new 5654 and 57...
Transom panels are available in the following constructions: 1 3/4" thick panels with interior construction similar to an L-Series door installed into a frame either Without a transom bar - r...
If the door hits the frame (or rubs on the rabbet of the head or jamb) the frame is out of square and improperly installed. Door edge rubbing on the rabbet - shimming the hinges may resolve the...
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device.  Be sure this screw is installed- Exit hardware and strike must be properly mounted ...
Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...