Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ knurling for AL locks ”

RELATED FAQS

Question
Answer
What is the part number for the AL SFIC spacers?
The AL lock will be shipped with two spacers.  Use two spacers for 6-pin cores and use one spacer for 7-pin cores.
The part number for one spacer is D500-000.
What is the diameter of the 04-060 AL rose?
The rose measures 3-7/16" diameter.
Is there a tool to drill the thru bolt holes on cylindrical locks?
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig.  When the jig changed to...
What is the part number for the lever insert on an AL lock manufactured before May 2002?
A700-015, standard cylinder lever insert.
How does the AL170 get installed to make a double dummy?
Schlage offers the AL170 single dummy trim, but for applications where a double dummy is needed you can install two AL170 dummy trims back-to-back.  Each AL170 is shipped with a threaded rod (part ...
Are ND locks available in 629 or 630 finishes?
The AL and ND locks are not available in any stainless steel finishes.  The only option is either the 626 satin chrome or 625 bright chrome.
How do you remove an AL lock from a door?
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
Why can't I remove the control key from the core after the core is inserted into the lever?
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
What does the hotel indicator look like for the A, AL, D, and ND?
Indicator not extended Indicator extended
The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed.  When this pin is ...
What is the part number for the SFIC driver on the AL locks?
The small format core throw member for the AL locks is C604-381.
Will an AL lever fit onto an A-series lock?
The AL and A trim is not compatible with each other.
What is the part number of the new plastic castlenut wrench?
The castlenut wrench material was changed from steel to a very strong polymer.  The new part number is 40-017.
Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
AL-Series Plunger Assembly Instructions
Changing the plunger assembly on the AL-Series requires disassembling the chassis.  Refer to Plunger Assembly Instructions for guidance.
What grade is the AL lock?
The AL lock is a Grade 2 lock ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.