L series doors powder coated

RELATED FAQS

Question
Answer
Steelcraft does not offer factory powder coated doors and/or frames. Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat. The higher heat can ca...
Most Panic devices are not designed for exterior applications. As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish an...
Beginning December 6, 2010, all 33A, 35A, 98 & 99 devices ordered as 313AN Anodized was furnished in SP313 (dark brown powder coat).  All devices ordered as 315AN ...
The closest powder coat finish by LCN is Dark Bronze (BHMA 695).
The current Powder Coat finishes are: Aluminum (BHMA 689) Dark Bronze (BHMA 695) Brass (BHMA 696) Light Bronze (BHMA 691) Statuary Bronze (BHMA 690) Black (BHMA 693)For list of standar...
Tan Powder Coat can be ordered but only available as a special finish with a metal cover.
White Powder Coat can be ordered as a special RAL finish with a metal cover.
For custom powder coat (LCN RAL customer powder coat colors) guide/chart please see here.
Monorail cutouts are typically the upper corner of door. Channels are cut to size welded into door held flush to cutout. We do not supply any covers or plates to finish.
The size monorail cutout is 8" wide x 24" high
Monorail cutouts are only available for non fire rated applications.
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped.  The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...