Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LCN arm length ”

RELATED FAQS

Question
Answer
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
EDA ARM - The EDA arm is a heavy duty parallel arm mount.  The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
Which arm is the same as the 4640 regular arm?
The 4640 Regular arm (4640-3077) is the same as: 4040 Long Arm 4820 Regular arm. The arms listed above are for reveals up to 4 1/2" and have a 8 3/8" long rod and shoe. 4640 Long arm ...
What are the SRT screws lengths used with LCN Closers?
SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified.   There are 3 standard lengths of SRT screws: 1-3/8" 1...
What are the Rod and Shoe lengths for 4000 and 1000 series closers?
STANDARD ROD AND SHOE: 4020, 4031, 1460, 1520, 1370, 1070, 1260, 4640, 4820 is: 8 3/8” LONG ROD AND SHOE: 4020: 4031, 1460, 1520, 1370, 1070, 1260, 4640, 4820 is: 12 3/8” STANDARD ROD AN...
What are the dimensions of an LCN-61 blade stop spacer?
The LCN -61 Blade Stop Spacer is powder coated steel and measures 4" x 1 1/8" x 1/2" (overall dimensions).
Can a 4040T DE be used with a 4" reveal on the pull side?
An LCN 4040T with a reveal deeper than 1/8" on the pull side of the opening requires a Double Egress (DE)arm. ST3073 Standard 4040T DE Arm will accommodate reveals up to 2-11/16"....
Are the Falcon FA arms handed?
The Falcon FA arm is a non-handed arm similar to the LCN EDA arm.The Falcon FA-HO arm is a handed arm similar to the LCN HEDA arm.