Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn screw packs ”

RELATED FAQS

Question
Answer
What are the SRT screws lengths used with LCN Closers?
SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified.   There are 3 standard lengths of SRT screws: 1-3/8" 1...
What is the thread size on LCN thru bolts?
The LCN Thru bolts accept 1/4-20 thread. LCN thru bolts are made of steel with zinc plating.
Does LCN have Torx head wood screws?
Torx head screws are only available as machine screws.
What LCN closers are available in a tri-pack mounting?
The 4040XP, 1260/1261, 1460/1461, 4030/4031 closers have the tri-pack mounting option when ordered with an Rw/PA or Hw/PA designation.
Do LCN closers come with thru bolts?
The standard screw pack for an LCN closer is the SRT (Self Reaming and Tapping) screw. Thru bolts are an option, but must be specified on the order. There is no charge for them, but they do need to...
Do I need to order the LCN 4040XP closer X ST-3596 to get the cover screw to secure the snap on cover to the cylinder?
No.  As of June 27th, 2018--- the cover screw is now standard in the screw packs for the 4040XP, 4040XPT, 4000T, and 4040SE so ST-3596 is no longer needed.    
What size Allen wrench is used for Closer adjustment?
LCN does not supply Allen wrenches, the size that LCN uses, are standard sizes that every installer will have in their tool kit. 3/32" Allen wrench for adjusting regulation valves: main speed, lat...
Can SRT screws be used in a wood door or frame?
LCN "does not" recommend the use of SRT screws is wood doors. LCN "only" recommends the use of Wood Screws in wood doors and frames, as noted on the installation instructions.
What is the part number for the 1460 cylinder mounting bracket?
The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack.  Please note it used to be shipped loos...
What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?
A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.
What are the part numbers for the mounting posts and screws for an L9000 lock?
 Mounting Posts   Part Number  Door Thickness  L583-211  1 3/8"  L583-212  1 3/4" - See note section on SL1 trim  L583-213  2...
Is there a thick door kit for the B500 deadbolt?
B500 with standard cylinders How to order with the deadbolt: Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is ordered Door thickness greater than 2 1/4" will req...