Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Lever handle unlocks when up ”

RELATED FAQS

Question
Answer
Why does my AD or CO series lock unlock when the lever is raised?
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.    This will occur if the outside spindle (square post) is install...
Can the Von Duprin 996L lever handle be replaced with a new one?
Yes, Von Duprin 996L lever handle can be replaced with a new one . Attached installation instructions shown how to replace the existing lever handle on 994/996L trim for rim and vertical rod device...
Is the 375L the only trim that will lock with a lever for the 5575?
The 375L is the only lever trim with 5575 mortise device that locks or unlocks the outside handle.
LEVER HANDLE
Trim
Why is the key locking and/or unlocking my E996L for a 9875?
The 7500 mortise lock should be configured for NL function as shipped not as Classroom. See figure 4-3 in E996L instructions.
Outside lever on the T and RU 571's won't unlock after egress.
Check the timing first, Where can I find timing instructions for the Falcon T lock? The keyspindle assembly for the T/RU571 and the T/RU561 w...
Replace the lock chassis as necessary for any T locks exhibiting this issue.  RU locks need to be replaced entirely.