The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch.
To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...
As previously announced, Von Duprin 230L trim used with the 22 series device has been redesigned with modifications to the lever assembly.
- Complete Marketing ...
Device: Pushbar end caps, pushbar trim and center case cover.
Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps:
R...
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...
You can order an L lock with a lever on one side and knob on the other as long as it's still rose by rose, or escutcheon by escutcheon (must be same style escutcheon).
EXCEPTIONS: Knob trim o...
Includes the SL1 lever on one side and the SK1 knob trim on the other side.
The Von Duprin 7500 mortise lock body ships in the NL mode. Either the function of 7500 lock body has not been changed to the Classroom function or the NL Drive screw is not all the way down. Step...
Tips for changing the function:
The NL Drive screw will not be visible when lock body is set to Classroom function
There is locktite on the screw that makes it seem like its turned down enou...
EL is Electric latch retraction and retract the latch bolt into the exit device center case. E references the electric unlocking of the Pull Side trim for a Panic Device. With the E function, th...
Application is based on how the door will be used. Please contact Product Support at 877-671-7011 to discuss your application and select the correct device for your opening.
Frascio is a company that provides decorative lever sets for many of Allegion products. More information can be found on their web site at WWW.frasciointernational.com.
The 812L trim is available for the 18 series as it is still used on the XX series. When ordering, state the type of device trim is being used on: rim, mortise, or surface vertical rod.
The Monarch KIL trim uses the following cylinders: Schlage Cylinders 23-013 Conventional 20-750 Primus 20-750-XP Primus XP 20-550 Primus UL437 20-550-XP Primus UL437 XP Falcon Cylinder A23165-0...
Von Duprin used to offer a KP992L trim that was operating the 98/99 series exit devices but it was discontinued in mid 1990. Von Duprin does not make a keypad trim any longer.
Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device.
Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...
Outside Knob/Lever and Rose/Escutcheon Assemblies
Part Number
Description
A Rose with Knob/Lever
09-506
Designs: 01 02 03 05 06 07 12 17 18 OME 41 42
09-655
Des...
To convert the Von Duprin 9975NL(Night Latch or Storeroom) to 9975L (Classroom) exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory):
Turn the NL ...
To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory):
Turn the NL screw on 7500 mortise lock counter clo...
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device. Be sure this screw is installed- Exit hardware and strike must be properly mounted ...
We have several blank trims listed in the price book to cover existing trim prep in door.
DEVICE
EO TRIM
22
230EO
88
880EO
98/99
990EO or 996EO*
33A/35A Rim, 33/3...
Inside cylinder locks and unlocks the outside trim, such as thumb piece, knob or lever. Outside cylinder functions as an NL when inside cylinder locks the outside trim.Double cylinder fe...