lever trim droop

RELATED FAQS

Question
Answer
  Issue: One or both levers don't stay horizontal and droop down.   Facts: Falcon T series locks in a high use application.   Cause: Weak or broken springs within t...
Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...
The lever may be in the break away position. The 996L has a break away design.  If the lever has been forced down to a 6 o’clock position, it needs to be firmly pulled up to a horizontal pos...
The spring in the hinge case or end case assembly lifts the crossbar and both lever arms.  If broken, the crossbar and lever arms will drop down. The weight of the crossbar and levers will automati...
ND-series locks manufactured on or after January 30, 2017 will ship with an improved spring cage and matching lever design. The design features are noted below. Because of this change, there a...
NOTE: ND locks manufactured on or after January 30, 2017 will no longer make use of the soft durometer spacer. The improved spring cage and matching lever eliminates the need for this spacer. ...
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...
The Schlage Danmark levers are not available on the Von Duprin 996L lever trim.