Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lockset mounting height ”

RELATED FAQS

Question
Answer
What is the ANSI recommendation for the distance between the actuator and the door opening?
Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...
What height should a lock or deadbolt be installed?
According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...
Why does the the 9954 mullion have taller bottom fittings than the 4954?
Bottom mounting fitting on 9954 is taller than 4954. The taller bottom fitting is required for a fire rated application.
What are the dimensions of the SC70 footprint
The measurements from center line to centerline of the mounting holes are 2-3/8"  x  6-3/4".
What are the dimensions for mounting a 1261 on the pull side of the door
http://lcnclosers.com/pdfs
How do I cut a door to accept a Falcon W series lock?
For W lock levers, you can choose whether or not to install the mounting posts.  This will also affect how the door is prepped so be sure to determine how you will install the locks befor...
What is the Buy American Act (BAA)?
BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act. A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegion...
Country of Origin (COO) information can be found in the Buy American Act (BAA) brochure.
To obtain product certification forms:Download the BAA Catalog on the Allegion website Complete the information requested in the the BAA Catalog with a detailed copy of the prod...