Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ long arm for pull side mount ”

RELATED FAQS

Question
Answer
What side of the door is the 4040SE mounted?
The 4040SE is non handed and can be mounted on the push or pull side of the door.
Can you mount a 4011 as a parallel arm like the 4111?
The 4011 can only mount on the Pull Side of the door and the 4111 can only mount on the Push Side of the door. Differences - The 4011 and the 4111 cylinders are different and the pinion shafts are...
Can a 4040 regular mount installed on the pull side and a Glynn Johnson 90 be mounted together?
The LCN 4041/4040XP and the Glynn Johnson 90 series can be mounted in conjunction with each other without a special template.  The 4040 door closer is on the pull side of the door and the GJ 90 is ...
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
What drop plate is used with a 4040 Rw/PA?
The 4040 Rw/PA can be mounted 3 different ways. The 4040-18 drop plate is used for the regular pull side mount. The 4040-18TJ drop plate is used for the top jamb push side mount. The 4040-18P...
Is there a heavy duty arm available for the 4040 mounted pull side?
ST2795 allows the the 4040 to be mounted pull side with a solid (heavy duty) arm.
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
EDA ARM - The EDA arm is a heavy duty parallel arm mount.  The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
What are Pneumatic Automatic Operators?
 Pneumatic Automatic Operators are used in areas where electrically operated devices are not convenient or permitted.  Consists of a modified, heavy-duty door closer for manual oper...
What special template (ST) is used with a 4040XP with a non-adjustable (solid) regular arm for pull side mounting?
Special Template ST-2795 is used to mount a non-adjustable (solid) regular arm for pull side mounting.   
Will a 4040 Hw/PA hold open at 180°?
The 4041 Rw/PA and the Hw/PA have the same template.  The only difference is the arm. The 4041/4040XP Hw/PA, if mounted to the 180° template, will hold the door open at 180°. Rw/PA is Regular A...